|
The Hammer Train Horn Kit has been designed to fit where other horns can't. The trumpet length remains, in order to provide the low tones so characteristic to an authentic train horn sound, but the manifold width has been decreased dramatically in size. The height and width is about the same as a dollar bill - 6" wide and 7" high. The whole bundle, including the manifold is 15" long. The Hammer will fit almost anywhere, on almost any vehicle. If you choose to mount it on roof, the compact design will reduce wind resistance and cut down on wind noise. NOTE: These train horn kits are frequently out of stock and on back order. Shipping is often delayed.
The Hammer Train Horn Kit includes everything you see below and superior customer service from PB Missions at no extra charge!
- Viair 380C Pump
- 3 Gallon 8 Port 200psi Tank
- Tank Size: 8in x 7in x 21in
- Wiring Harness with Relay
- 20' 3/8" BIG Air Hose & Fittings
- Gauge, Pressure Switch, Safety, & Drain Ports
- 200psi Pressure Switch
- 200psi+ Gauge
- 200psi Tank Stamp
- Drain Tee
- Safety Valve
- Pressure Switch
- Fitting
- 4 1/2in NPT Ports
- 3 1/4in NPT Ports
- 1 1/8in Port
- Viair Air Filter
- Viair Replacement Elements
- Air Filter Remote Mount Kit
- Check Valve
- Installation Guide Written for the First Time Installer
- Hammer Mark II Horns - 22kt Gold Plating
- Tuned Manifold
- GMAX MONSTER Valve
- Siege Logo on Caps
- All Metal Construction
If you think the compact size cuts down on volume - THINK AGAIN ! |
Train Horn Accessories
