|
The Hammer Train Horn series is known for its loud, authentic sound and for a compact design that lets you mount them almost anywhere, even when space is limited. Gold plating makes them nice enough to show off on the roof and compact enough to cut wind resistance and reduce wind noise. The width of the manifold is only 6" and is only 7" high. The entire assembly is 15" long. Trumpets were narrowed but the length was kept intact so they still produce those low tones necessary for that real train horn sound. NOTE: These train horn kits are frequently out of stock and on back order. Shipping is often delayed. The Hammer 3 Train Horn Kit comes complete and ready to install with everything you see below, as well as the unparalleled customer service from PB Missions.
- Viair 380C Pump
- 5 Gallon 10 Port 200psi Tank
- Tank Size: 10in x 11in x 22in
- Wiring Harness with Relay
- 20' 3/8" BIG Air Hose & Fittings
- Gauge, Pressure Switch, Safety, & Drain Ports
- 200psi Pressure Switch
- 200psi+ Gauge
- 200psi Tank Stamp
- Drain Tee
- Safety Valve
- Pressure Switch
- Fitting
- 6 1/2in NPT Ports
- 3 1/4in NPT Ports
- 1 1/8in Port
- Viair Air Filter
- Viair Replacement Elements
- Air Filter Remote Mount Kit
- Check Valve
- Installation Guide Written for the First Time Installer
- Hammer 3 Mark II Horns
- 22kt Gold Plating
- Tuned Manifold
- GMAX MONSTER Valve
- Siege Logo on Caps
- All Metal Construction
And don't think for a minute that compact design means giving up volume - Check this out!
 |
Train Horn Accessories
