Your Store

“The Rocker” Train Horn

“The Rocker” Train Horn
Product Code: HOR09
Reward Points: 0
Price: $189.99
   - OR -   

This two piece train horn assembly is built rugged, compact, lightweight and proudly in the U.S.A!  Constructed with fiberglass reinforced ABS plastic, it’s almost impossible to damage. Since the bells do not share a manifold, they can be independently mounted, making installation on any vehicle a breeze. Plus, the stainless steel diaphragms in these horns will never rust, so the bells will keep their sound.  Comes with a 2yr warranty!


  • Lightweight & Extremely Loud
  • Durable Fiberglass Reinforced ABS Plastic Body
  • Stainless Steel Diaphragm (won’t rust)
  • All-inclusive Brass Fittings Set
  • Standard Mounting Hardware
  • Made in the U.S.A.

Recommended For Use With The Following:

  • HornAir 200 Series Air Systems


  • Shocker S2 Train Horn
  • 3/8in Shocker Electric Valve
  • 10ft 5/16in DOT Spec. Air Line
  • 17ft 1/2in DOT Spec. Air Line
  • All Necessary Fittings
  • Mounting Hardware
  • Detailed Instructions
  • Limited Lifetime Warranty



Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:


Horns:  Classic 2-Piece Train Horns

Material:  High-Impact ABS

Length:  B3 14.75 in (374.65 mm), B4 12.75 in (323.85 mm)

Flare:  5 in (127 mm)

Weight:  4.5 lbs (2.04 Kg)

Fitting Size:  1/8 in NPT (M)

Valve:  Black Widow 1/2in Air Valve

Body Material:  Brass

Port Size:  1/2 in

Orifice Size:  1/2 in

Cv:  5.5

Voltage:  12 Volts DC

Tubing:  1/2 in, 5/16 in Nylon Tubing

Outer Diameter:  1/2 in, 5/16 in

Inner Diameter:  3/8 in, 3/16 in

Minimum Bend Radius:  50.8 mm, 48 mm

Max. Operating Pressure:  217 PSI, 217 PSI @ 68° F

Minimum Burst Pressure:  950 PSI, 650 PSI